How to Add a Signature to a PDF: 3 Methods Compared

Contents
You need to sign a contract or an application PDF, but you don't have a printer. Or maybe you scanned your signature and the yellowish background came along with it. There's more than one way to add a signature to a PDF. You can paste a scanned image, print the document and sign it by hand, then rescan, or draw directly on the screen. Each method takes a different amount of time and produces a different quality of result. Once you know how they differ, you can pick the right one for your situation.
Summary ① There are three ways to sign a PDF: paste a scanned image, print it and sign by hand then rescan, or draw directly on the screen ② Printing and rescanning takes a lot of steps, and depending on scan quality the text and the signature both come out blurry ③ Draw directly on the screen, clean up the background, and insert it right away — done in a few clicks with no printer or scanner
Why is signing a PDF such a hassle?
A PDF file has no built-in way to draw handwriting on it. You always have to create the signature as some kind of image and drop it onto the PDF. How you make that image is what separates the methods.
The most common approach is to sign a piece of paper ahead of time, capture it with a scanner or a camera, save it as an image file, and then place that file where you want it in a PDF editor. The white paper never scans as pure white, so a yellow tint or a shadow comes with it. And you have to open your scanner or camera app every single time you want to add one signature.
The second approach is to print the whole PDF, sign the paper by hand, and scan it back into a PDF. Printing and rescanning the entire document tends to blur or skew the text, and you need both a printer and a scanner, so it's hard to use when all you have is a laptop.
The third approach is to draw the signature right on the screen with a mouse or your finger and turn it into an image on the spot. You only need a browser and no extra equipment. But if the tool doesn't make the background transparent, you often end up with a white square box printed around the signature.
How to prepare and place a signature image, method by method
If you plan to use a scanned image, sign large and dark with a dark pen on white paper, then scan at 300dpi or higher. At low resolution, the edges of the signature look jagged and stair-stepped once it's in the PDF.
If you want to remove the background, erase the white area in an image editor such as Paint and save it as a PNG. Skip this step and a white rectangle stays behind the signature, which makes the document look sloppy.
If you go with print and rescan, keep the print settings at the original resolution, and use light compression when you convert the scan back to PDF so the body text doesn't turn to mush.
Drawing directly on the screen takes the least effort, as long as the background transparency is handled. You draw the signature on the spot with no paper, scanner, or printer, and once you've drawn it you place it on the page and position you want in the PDF.
Check it with our tool. The Sign PDF tool automatically cuts the background out of a signature you draw with a mouse or your finger and makes it transparent. Click the PDF preview or use the sliders to set the position and size, then hit insert signature and save, and the download starts right away.
Free · no sign-up · draw your signature right in your browser

Where people get stuck
| Situation | Cause |
|---|---|
| White background still shows on a scanned signature image | If you don't save the background as a transparent PNG, a white box shows up behind the signature |
| The signature lands on only one page of a multi-page document | Signatures are inserted one page at a time, so unless you turn on the all-pages option, it only applies to the single page you selected |
| The signature looks blurrier than the original | The scan resolution was low, or the image you used had been heavily compressed |
| The signature ends up in a slightly different spot every time | Placing it by hand after printing is guesswork, so small errors creep in |
As the table shows, most of these problems come from background handling, resolution, and eyeballing the position. Draw the signature on screen, let the tool clean it up automatically, and set the position in the preview, and none of these problems come up in the first place.
The short version
There are three ways to add a signature to a PDF: paste a scanned image, print and sign by hand then rescan, or draw directly on the screen. The first two need a printer and scanner, or leave you with background and resolution problems.
Draw directly on the screen, clean up the background, then set the position and size in the PDF preview and insert it. You get a signed PDF in a few clicks, with no equipment.
Free · no sign-up · draw your signature right in your browser
Frequently asked questions
Do I really need to make the background of my signature image transparent?
If you don't, a white rectangle stays around the signature and makes the document look sloppy. When you draw the signature right on the screen, the tool trims the empty margins, makes the background transparent, and places it on the PDF, so the problem never comes up.
How do I put the same signature in the same spot on multiple pages?
Turn on the insert on all pages option, and the same signature goes onto every page of the document at the exact left-right and top-bottom position and size you set. If you leave the option off, it only applies to the one page you currently have selected.
Can I redraw the signature if I mess it up?
Click Clear signature and the canvas empties so you can draw it again right there. The position and size values you already set on the page are kept, so you can place the new signature in the same spot and check it again.
This article was adapted from our Korean original. Read the Korean original